Use Of The Appliance; Set The Water Softener - Zanussi ZDTS401 User Manual

Programme
6
7
8
9
The pressure and temperature of the water, the

Use of the appliance

Refer to the following instructions for each step of pro-
cedure:
1. Make a check if the water softener level is correct
for the water hardness in your area. If necessary

set the water softener.

2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dishwasher.
Set the water softener
The water softener removes minerals and salts from
the water supply. Minerals and salts can have bad ef-
fect on the operation of the appliance.
Water hardness is measured in equivalent scales:
• German degrees (dH°).
• French degrees (°TH).
°dH °TH
51 - 70 91 - 125
43 - 50 76 - 90
37 - 42 65 - 75
Duration (in minutes)
30
160-170
45-55
65-75
Water hardness
mmol/l
9,1 - 12,5
7,6 - 9,0
6,5 - 7,5
Energy (in kWh)
0,8
0,8-0,9
0,8-0,9
0,6-0,7
variations of power supply and the quantity of dishes
can change these values.
5. Set the correct washing programme for the type of
load and soil.
6. Fill the detergent dispenser with the correct quan-
tity of detergent.
7. Start the washing programme.
If you use detergent tablets, refer to the chapter
'Use of detergent'.
• mmol/l (millimol per litre - international unit for the
hardness of water).
• Clarke.
Adjust the water softener in to the water hardness in
your area. If necessary, contact your local water au-
thority.
Clarke manually
64 - 88 2
53 - 63 2
46 - 52 2
Water (in litres)
8
12-13
10-11
11-12
Water hardness setting
electronically
10
9
8
7