Washing Programmes - Zanussi ZDTS401 User Manual

cancel the programme to go back to the setting mode.
Refer to the chapter "Setting and starting a washing
programme".
Optical signal
After the start of the washing programme, an optical
signal shows on the floor below the appliance door.
If the appliance is installed higher with a flush kitchen
furniture door, the optical signal will not be visible.
Optical signal
The red Indication of the start of a washing pro-
light is on. gramme. The red light stays on during
the washing programme.

Washing programmes

Washing programmes
Programme
1
2
3
1)
4
5
Degree of soil
Any Partial load (to be com-
pleted later in the day).
Heavy soil Crockery, cutlery, pots
and pans
Any Crockery, cutlery, pots
and pans
Normal soil Crockery and cutlery
Heavy soil Crockery, cutlery, pots
and pans
The red Indication of a malfunction.
light flash-
es.
The red Indication of the end of a washing pro-
light goes gramme.
off.
Type of load
1 cold rinse (to prevent food scraps to
bond).
Detergent is not necessary with this
programme.
Prewash
Main wash up to 70°C
1 intermediate rinse
Final rinse
Drying
Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying
Prewash
Main wash up to 65°C
1 intermediate rinse
Final rinse
Drying
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
Optical signal
Programme description
5