Handlebar Switches - Yamaha YZFR6X(C Owner's Manual

Handlebar switches

Left
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "
Right
1. Engine stop switch " / "
2. Start switch " "
INSTRUMENT AND CONTROL FUNCTIONS
EAU12347
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter.
EAU12400
/ "
CAUTION:
" for the high
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12460
/ "
The engine trouble warning light will
come on when the key is turned to "ON"
and the start switch is pushed, but this
". When re-
does not indicate a malfunction.
EAU12500
"
EAU12660
/ "
" before starting
" to
EAU12710
3-11
ECA10050
EAU41700
3