Yamaha YZFR6X(C Owner's Manual page 27

CAUTION:
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Display brightness and shift timing
indicator light control mode
2
MPH
1
1. Display brightness
2. Shift timing indicator light activation/deacti-
vation
3. Shift timing indicator light
4. Brightness level
This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.
INSTRUMENT AND CONTROL FUNCTIONS
G
ECA11590 Display brightness:
This function allows you to adjust
the brightness of the displays and
tachometer to suit the outside
lighting conditions.
G
Shift timing indicator light activity:
This function allows you to choose
whether or not the indicator light
should be activated and whether it
should flash or stay on when acti-
vated.
G
Shift timing indicator light activa-
tion:
1
This function allows you to select
4
the engine speed at which the indi-
cator light will be activated.
3
G Shift timing indicator light deactiva-
tion:
This function allows you to select
the engine speed at which the indi-
cator light will be deactivated.
G Shift timing indicator light bright-
ness:
This function allows you to adjust
the brightness of the indicator light
to suit your preference.
NOTE:
In this mode, the right display shows
the current setting for each function
(except the shift timing indicator light
activity function).
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
3. Turn the key to "ON", and then re-
4. Push the "RESET" button to select
5. Push the "SELECT" button to con-
To set the shift timing indicator light ac-
tivity function
1. Push the "RESET" button to select
3-9
ton.
lease the "SELECT" button after
five seconds.
the desired brightness level.
firm the selected brightness level.
The control mode changes to the
shift timing indicator light activity
function.
one of the following indicator light
activity settings:
3