Table of Contents
Advertisement
ProLiant BL30p and BL35p series server blades
The ProLiant BL30p and BL35p Server Blades are ideal for enterprise and high-performance
computing applications, including:
• High-performance technical computing applications
• Web
• E-commerce
• Server-based computing
• Messaging front-end
Figure 5. ProLiant BL30p Server Blade
Table 6. Features of the ProLiant BL30p and ProLiant BL35p Server Blades
ProLiant BL30p Server Blade
Processor
Up to two Intel Xeon processors
Internal storage
Up to two small form factor (SFF) ATA hard drives provide up to 120 GB capacity.
Memory
Two DIMM slots enable installation of up to
4 GB of PC2100 DDR, ECC, Registered
SDRAM. The memory is 2x1 interleaved for
added performance. Single DIMM non-
interleaved memory configurations are also
supported for added flexibility.
NICs
Two general-purpose NC7781 Gigabit PCI-X 10/100/1000T NICs with WOL plus one
10/100T NIC dedicated to iLO. The two general purpose NC-Series NICs support PXE and HP
NIC teaming.
LEDs
LEDs are provided to indicate the following:
- Power
- NIC link and activity
- Server blade health
- Unit identification
Density
Up to 16 server blades fit in a 6U server blade enclosure.
ProLiant BL35p Server Blade
Up to two AMD Opteron™ 200 Series
processors per server blade. Lower power
consumption per server enables use of more
server blades for a given power consumption
Four DIMM slots enable installation of up to
8 GB of PC3200, ECC, Registered SDRAM.
The memory is 2x1 interleaved for added
performance.
11
Advertisement
Table of Contents
