Required Input Power - HP Xw25p - ProLiant - Blade Workstation Overview

Figure 27. HP BladeSystem Equipment List Output Example
This Equipment List can be copied to an excel worksheet or word document. To copy this table, select the table using the mouse.
Copy the selected table using Copy command from the Edit menu.
Go to the destination document and paste it.
ProLiant BL20p server blace with ONE Pentium lll P1400-512K, 512MB RAM, no drives
ProLiant BL40p server blade with ONE Xeon MP1.5GHz-1MB Cache, 512MB RAM (2 x 256MB), no drives
ProLiant BL40p server blade with TWO Xeon MP2.0GHz-2MB Cache, 1GB RAM (2 x 512MB), no drives (Not
available in NA)
ProLiant BL20P G2 server blade with ONE Xeon P2.8GHz, 512MB RAM (2 x 256MB), no drives
ProLiant BL20p G2 server blade with TWO Xeon P2.8GHz, 1GB RAM (2 x 512MB), no drives (Not available in NA)
ProLiant BL20P G2 server blade with ONE Xeon P2.8GHz, 512MB RAM (2 x 256MB), no drives, with FC Mezz Card
ProLiant BL20p G2 server blade with TWO Xeon P2.8GHz, 1GB RAM (2 x 512MB), no drives, with FC Mezz card (Not
available in NA)
Additional 2 GB (2 x 1 GB) Memory Kit(s)
Additional DDR 512 MB (2 x 256 MB) Memory Kit(s)
Additional DDR 1 GB (2 x 512 MB) Memory Kit(s)
Additional DDR 2 GB (2 x 1 GB) Memory Kit(s)
Additional DDR 4 GB (2 x 2 GB) Memory Kit(s)
Additional Pentium III 1.4GHz
Additional Xeon MP 1.5 GHz
For more information about the HP BladeSystem p-Class Sizing Utility, refer to
http://www.hp.com/go/bladesystem/sizingutility

Required input power

The HP BladeSystem p-Class 3U power subsystem has specific AC power requirements. However, DC
power may be used instead if the facility has DC power available.
When using an AC power source, the HP BladeSystem requires single-phase (1U or 3U power
enclosures) or three-phase (3U power enclosures) 200–240 VAC input power. The 3U power
enclosure requires two 30 A power sources.
The capacity of an HP BladeSystem p-Class Power Supply varies with the voltage level of the local AC
power source. Maximum capacity can only be achieved using a 240-V nominally rated power
source. Lower voltages may result in lower server blade capacity. The HP BladeSystem p-Class Sizing
Utility considers this. Refer to Figure 28 for the maximum output power capacity for various input
voltages between 200–240 VAC.
Equipment List
Part Description
Qty Part Number
4 230040-B21
1 293461-B21
4 293462-B21
7 300876-B21
8 300877-B21
2 300980-B21
300981-B21
7
2 201695-B21
6 300678-B21
2 300679-B21
8 300680-B21
11 300682-B21
4 234277-B21
3 309330-B21
39