Electrical Connection - Zanussi ZDTS102 User Manual

Drain hose
1
Connect the water drain
hose to the sink spigot.

Electrical connection

Warning! The manufacturer is not responsible if
you do not follow these safety precautions.
Ground the appliance according to safety precautions.
Make sure that the rated voltage and type of power on
the rating plate agree with the voltage and the power
of the local power supply.
Always use a correctly installed shockproof socket.
Do not use multi-way plugs, connectors and extension
cables. There is a risk of fire.
16
max 85 cm
min 40 cm
2
3
The internal diameter must not be smaller than the di-
ameter of the hose.
If you connect the water drain hose to a trap spigot
under the sink, remove the plastic membrane (A). If you
do not remove the membrane, remaining food can
cause a blockage in the drain hose spigot.
Caution! Make sure that the water couplings are
tight to prevent water leakage.
Do not replace the mains cable yourself. Contact the
Service Force Centre.
Make sure that the mains plug is accessible after
installation.
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
4