Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT 6764
Summary of Contents for Zanussi ZDT 6764
- Page 1 DISHWASHER ZDT 6764 www.zanussi.co.uk INSTRUCTION BOOK 152956 63/0...
-
Page 2: Table Of Contents
Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Audible signals Prior to using for the first time The water softener Filling with dishwasher salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket... -
Page 3: Safety Instructions
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. -
Page 4: Description Of The Appliance
Description of the appliance Upper basket stop Water hardness dial Salt container Detergent dispenser Control panel Rating plate Rinse aid dispenser Filters Lower spray arm 10. Upper spray arm 11. Upper basket IN153... -
Page 5: The Control Panel
The control panel On/Off button Function buttons: in addition to the selection of the washing programme and the half load option, the following functions can also be set with the help of these buttons: - water softener setting, - the cancelling of a washing programme in progress, - deactivation/activation of the audible signals. -
Page 6: Prior To Using For The First Time
Prior to using for the first time Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener. 4. -
Page 7: Filling With Dishwasher Salt
Filling with dishwasher salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. -
Page 8: In Daily Use
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Load cutlery and dishes into the dishwasher. Fill with dishwasher detergent . Select a wash programme suitable for the cutlery and dishes. Start the wash programme. For washing in the dishwasher the following cutlery/dishes are not suitable: - Cutlery with wooden, horn, china or... -
Page 9: The Cutlery Basket
The cutlery basket Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. -
Page 10: Adjusting The Height Of The Upper Basket
Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in upper basket With upper basket raised 20 cm With upper basket lowered 24 cm... -
Page 11: Different Kinds Of Detergent
Different kinds of detergent Detergent tablets Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of detergent residuals. -
Page 12: Washing Programmes
Washing programmes Programme Degree of soil type of load Any. Partial load (to be Rinse and Hold completed later in the day) Heavy soil. Crockery, cutlery, pots Intensive 70°C and pans Normal soil. Automatic 50°-65°C Crockery, cutlery, pots and pans Fresh soil. -
Page 13: Starting A Washing Programme
Starting a washing programme In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. -
Page 14: Maintenance And Cleaning
Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc...). Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. -
Page 15: What To Do, When
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The dishwasher will not start or stops during operation and a sequence of intermittent audible signals are heard. Open the dishwasher door. -
Page 16: The Wash Results Are Not Satisfactory
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. -
Page 17: Service And Spare Parts
Tel: + 353 (0)1 4090751 Email: service.eid@electrolux.ie Customer Care Department For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk... -
Page 18: Guarantee Conditions
Guarantee Conditions Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same... -
Page 19: Technical Specifications
Installation instructions Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. -
Page 20: Water Outlet Hose Connection
Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. -
Page 21: Hints For Test Centres
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"... - Page 24 From the Electrolux Group. The World’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.