Use Of Dishwasher Salt; Use Of Rinse Aid - Zanussi ZDTS102 User Manual

3. Press and hold the programme selection/cancel
button.
4. Release the programme selection/cancel button
when programme indicator light A starts to flash
and programme indicator light B comes on.
5. Wait until programme indicator light B goes off.
– Programme indicator light A starts to flash.
– The end indicator light starts to flash.
6. Press the programme selection/cancel button one
time.
– Programme indicator light A starts to flash.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of
salt that are not applicable for dishwashers cause
damage to the water softener.
1
3
Fill the salt container with
1 litre of water (only the
first operation).

Use of rinse aid

Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
2
4
– The setting function of the water softener is ac-
tivated.
– The end indicator light flashes to show the level
of the water softener.
Example: 5 flashes, pause, 5 flashes, pause,
etc... = level 5.
7. Press the programme selection/cancel button one
time to increase the water softener level by one
step.
8. Press the on/off button to save the operation.
5
It is normal that water overflows from the salt
container when you fill it with salt.
Make sure that there is no grain of salt outer of
the salt compartment. Salt which stays on the
tank for a while drills the tank. It is recommended to
start a washing programme immediately after you fill
the salt container. This prevents of corrosion because
of spilled salt.
When you set electronically the water softener to level
1, the salt indicator light does not stay on.
6
7