Selecting An Additional Boiler; Selecting The Connection For Heating Circuits 1 To 3; Dhw Connection; Selecting Dhw Circulation (If Heating Circuit Extension Module Installed) - Viessmann Vitoligno 200-S Installation And Service Instructions Manual

Commissioning, inspection, maintenance

Selecting an additional boiler

If an additional heat source is to be selected, press the
following keys:
1. / for additional boiler "Yes/No"
| ~

Selecting the connection for heating circuits 1 to 3

To specify where the respective heating circuit is con-
nected, press the following keys:
1. / for "No":
| ~
Not installed.
for "On the boiler" (if heating circuit exten-
sion module installed):
Connected at internal PCB.
for "On the mixer module":
Connected to extension kit via KM-BUS.

DHW connection

Select the connection for DHW heating:
1. / for "No":
| ~
Not installed.
for "On the boiler" (if heating circuit exten-
sion module installed):
Connected at internal PCB.
for "On the mixer module":
Connected to extension kit via KM-BUS.

Selecting DHW circulation (if heating circuit extension module installed)

To specify whether a DHW circulation pump is connec-
ted, press the following keys:
1. / for DHW circulation "Yes/No"
| ~

Selecting the solar connection

Press the following keys:
1. / for "No":
| ~
Not installed.
for "On the boiler" (if heating circuit exten-
sion module installed):
Connected at internal PCB.
for "On the external solar module":
Connected to Vitosolic via KM-BUS.
28
2. to confirm.
d
2. to confirm.
d
2. to confirm.
d
2. to confirm.
d
2. to confirm.
d