To activate the welcome light function,
press button q on the remote control
twice, with the vehicle locked.
Country-specific v ersion 3 :
To enable the welcome light function, press
button q on the rem ote control once, with
the v ehicle loc ked.
This fea ture is deactivated im med iately by
pressing button p on the remote control or
by switching on the ignition.
Picture no: 14759s.tif
In strument illumination
In formation display illumination
Illum inates when ignition is switched on.
Brig htness can be adjusted when the
exterior lights are on:
Push to release knob k a nd then turn it
cloc kwise or anticlockwise and hold until
the desired brightness is obtained.
Display illum ination 3 – see page 99.
Picture no: 14136s.tif
,
Courtesy light
k
Autom atic interior light
Illuminates automatically when the vehicle
is unlocked with the remote control or when
a door is opened.
Goes off automatically a fter a delay w hen
the doors are closed or im mediately w hen
the ig nition is switched on or the doors are
locked.
Front courtesy l ight
Manual operation from inside, with doors
closed:
O n
=
Press light switch 0
O ff
=
Press light switch 0 a gain
Lightin g
111