Vauxhall Meriva Infotainment Manual
  1. Manuals
  2. Brands
  3. Vauxhall Manuals
  4. Car Receiver
  5. Meriva
  6. Infotainment manual
Vauxhall Meriva Infotainment Manual

Vauxhall Meriva Infotainment Manual

2010.5
Hide thumbs Also See for Meriva:
Table of Contents

Advertisement

Quick Links

See also: Infotainment Manual , Owner's Manual
VAUXHALL Meriva
0 - 1
VAUXHALL Meriva
Infotainment Manual
Model Year 2010.5
Edition: January 2010
TS 1689-B-10

Advertisement

Table of Contents
loading

Related Manuals for Vauxhall Meriva

Summary of Contents for Vauxhall Meriva

  • Page 1 VAUXHALL Meriva 0 - 1 VAUXHALL Meriva Infotainment Manual Model Year 2010.5 Edition: January 2010 TS 1689-B-10...

  • Page 2: Infotainment System

    Infotainment system Infotainment system Introduction The digital sound processor provides you with several preset equalizer modes for sound optimisation. General information The navigation system (only CD 500 / The Infotainment system provides Introduction ........1 DVD 800) with dynamic route you with state-of-the-art in-car planning will reliably guide you to your Radio ...........
  • Page 3 Infotainment system Important information on Theft-deterrent feature 9 Warning operation and traffic safety The Infotainment system is equipped with an electronic security system for In some areas one-way streets 9 Warning the purpose of theft deterrent. and other roads and entrances (e.
  • Page 4 Infotainment system...

  • Page 5: Table Of Contents

    Infotainment system Control elements overview AS (1/2) ......... 24 14 Multifunction knob ....13 Automatic memory levels Central control for Instrument panel CD 500 / (preset radio stations) ... 24 selection and navigation in DVD 800 Short press: select menus ........13 autostore list ......
  • Page 6 Infotainment system...

  • Page 7: Instrument Panel Cd

    Infotainment system Instrument panel CD 400 AS (1/2) ......... 24 13 Multifunction knob ....13 Automatic memory levels Turn: mark menu options RADIO (BAND) ..... 23 (preset radio stations) ... 24 or set numeric values ... 13 Activate radio or change Short press: select Press: select/activate the waveband ......
  • Page 8 Infotainment system...
  • Page 9 Infotainment system Instrument panel CDC 400 AS (1/2) ......... 24 13 Multifunction knob ....13 Automatic memory levels Turn: mark menu options RADIO (BAND) ..... 23 (preset radio stations) ... 24 or set numeric values ... 13 Activate radio or change Short press: select Press: select/activate the waveband ......
  • Page 10 Infotainment system...
  • Page 11 Infotainment system Instrument panel CD 300 AS (1/2) ......... 24 14 Multifunction knob ....13 Automatic memory levels Turn: mark menu options RADIO (BAND) ..... 23 (preset radio stations) ... 24 or set numeric values ... 13 Activate radio or change Short press: select Press: select/activate the waveband ......
  • Page 12 Infotainment system Steering wheel audio controls SRC (Source) ......3 Usage Press: select audio source ..3 Control elements If radio active: turn upwards/downwards to The Infotainment system is operated select next/previous via function buttons, multifunctional preset radio station ....23 knobs and menus that are shown on If CD player active: turn the display.

  • Page 13: Cd/Aux

    Infotainment system When the Infotainment system is Volume limitation at high CD 500 / DVD 800 switched on, the last selected volume temperatures Detailed description of: is set, if that volume is lower than the (only CD 300 / CD 400 / CDC 400) ■...

  • Page 14: Basic Operation

    Infotainment system Detailed description of the mobile BACK button Turn the multifunction knob to move phone portal functions 3 79. the cursor (= coloured background) to Press the BACK button briefly to: the desired option. ■ exit a menu Basic operation Press the multifunction knob to select ■...
  • Page 15 Infotainment system Setting a value Switching a function on or off Entering a character sequence Turn the multifunction knob to change Turn the multifunction knob to mark To enter character sequences, e. g. the current value of the setting. the function to be switched on or off. telephone numbers or road names: Press the multifunction knob to Press the multifunction knob to switch...
  • Page 16 Infotainment system Examples relating to CD 400 / Activating a setting Setting a value CDC 400 Selecting an option Turn the multifunction knob to mark Turn the multifunction knob to change the desired setting. the current value of the setting. Turn the multifunction knob to move Press the multifunction knob to Press the multifunction knob to...
  • Page 17 Infotainment system Switching a function on or off Entering a character sequence Examples relating to CD 300 Menu elements and symbols Turn the multifunction knob to mark For the input of character sequences, the function to be switched on or off. e.
  • Page 18 Infotainment system The arrow pointing to the right 3 Setting a value Switching a function on or off indicates: the first submenu level is active (two arrows = second submenu level active). The down arrow 4 indicates: further options are available in the active submenu.
  • Page 19 Infotainment system Entering a character sequence Tone settings Setting bass, middle and treble CD 500 / DVD 800 In the tone settings menu the tone characteristic can be set differently for each radio waveband and each audio player source. Press the multifunction knob to open Select Bass, Middle or Treble.
  • Page 20 Infotainment system Setting the volume distribution Setting the volume distribution Optimising the tone for the style of between front - rear between right - left music Select Fader. Select Balance. Select EQ (Equalizer). Set the desired value. Set the desired value. The displayed options offer optimised bass, middle and treble presettings Setting an individual setting to “0”...
  • Page 21 Infotainment system Select Bass, Midrange or Treble. Setting the volume distribution between right - left Set the desired value for the selected option. Setting the volume distribution between front - rear Press the TONE button to open the tone menu. Select Balance.

  • Page 22: Volume Settings

    Infotainment system Optimizing the tone for the style of Volume settings Volume of the traffic announcements music (TA) CD 500 / DVD 800 The volume of the traffic announcements can be increased or Speed dependent volume reduced proportionately to the normal audio volume.
  • Page 23 Infotainment system CD 300 / CD 400 / CDC 400 Speed compensated volume Volume of the traffic announcements (TA) Maximum startup volume The volume of the traffic announcements can be increased or reduced proportionately to the normal audio volume. Press the CONFIG button to open the system settings menu.
  • Page 24 Infotainment system Radio Personalisation ■ last position in Audio/MP3 CD or changer unit (if available) including (only CD 400 / CDC 400) disk number, track number, folder Usage Various Infotainment system settings ■ state of shuffle songs setting can be separately memorised for Control buttons (CD player) each vehicle key (driver) of the car.

  • Page 25: Autostore Lists

    Infotainment system Station search Note Autostore lists Manual station search: If the radio The stations that can be received best Automatic station search does not find a station, it switches in a waveband can be searched for Briefly press the button s or u automatically to a more sensitive and stored automatically via the search level.

  • Page 26: Favourite Lists

    Infotainment system CD 400 / CDC 400: To abort the autostore procedure, Favourite lists press the multifunction knob. Stations of all wavebands can be stored manually in the favourite lists. Storing stations manually Stations can also be stored manually CD 500 / DVD 800 in the autostore lists.
  • Page 27 Infotainment system Briefly press the FAV button to open Press CONFIG button. Storing a station a favourite list or to switch to another Set the station to be stored. Select Radio settings and then Radio favourite list. favourites. Briefly press the FAV button to open To store the station in a list position: a favourite list or to switch to another Select the desired number of...
  • Page 28 Infotainment system Note The following FM specific displays are shown as examples. CD 500 / DVD 800 Press the CONFIG button. Select the required station. Select Radio settings and then Radio Note favourites. The currently received station is marked by i. Select the desired number of available favourite lists.
  • Page 29 Infotainment system All receivable DAB stations 3 36 in Updating station lists once in the station list at a sudden change in reception area. In such the current reception area are If the stations stored in a waveband- circumstances the updating of the displayed.
  • Page 30 Infotainment system The currently received DAB service (programme) is interrupted when any announcements of previously activated categories are pending. Activating announcement categories Select DAB announcements in the DAB menu. A list of programme types available at Select the required station. the moment is displayed.
  • Page 31 Infotainment system CD 300 / CD 400 / CDC 400 All receivable DAB stations 3 36 in the current reception area are displayed. Note If no station list has been created beforehand, the Infotainment system performs an automatic station search. Select the required station.
  • Page 32 Infotainment system If the stations stored in a waveband- The Infotainment system stores these specific station list can no longer be stations, sorted by programme type, received: in the corresponding category list. Select the corresponding command To search for a programme type to update a station list.
  • Page 33 Infotainment system The currently received DAB service Radio data system (RDS) CD 500 / DVD 800 (programme) is interrupted when any RDS is a service of FM stations that announcements of previously considerably facilitates the finding of activated categories are pending. the desired station and its fault-free Activating announcement categories reception.
  • Page 34 Infotainment system If regionalization is switched off, Radio traffic service alternative frequencies of the stations (TP = Traffic Programme) are selected without regard to Radio traffic service stations are RDS regional programmes. stations that broadcast traffic news. RDS scrolling text Switching the radio traffic service on Some RDS stations hide the and off...
  • Page 35 Infotainment system ■ Traffic announcements are played CD 300 / CD 400 / CDC 400 at the preset TA volume 3 21. ■ If the radio traffic service is switched on, CD/MP3 replay is interrupted for the duration of the traffic announcement.
  • Page 36 Infotainment system At certain times some RDS stations being played at the moment are ■ If a radio traffic service station has broadcast regionally different displayed below the programme been found, [TP] is displayed in the programmes on different frequencies. name.

  • Page 37: Digital Audio Broadcasting

    Infotainment system EON (Enhanced Other Networks) CD 500 / DVD 800: General information With EON you can listen to radio ■ With DAB, several radio traffic announcements even if the programmes (services) can be station you have set does not broadcast on a single frequency broadcast its own radio traffic service.

  • Page 38: Configuring Dab

    Infotainment system is interrupted completely. This Configuring DAB ■ Dynamic audio adaption: with this incident can be avoided by: function activated, the dynamic CD 500 / DVD 800 range of the DAB signal is reduced. CD 500 / DVD 800: activating Auto That means the level of the loud ensemble linking in the DAB sounds is reduced, but not the level...
  • Page 39 Infotainment system CD/DVD player Press the CONFIG button. can be raised to a point where the quiet sounds are audible, without Select Radio settings and then DAB the loud sounds being too loud. General information settings. ■ Frequency band: after selection of The following options are available in CD 500 / DVD 800 this option it can be defined which...
  • Page 40 Infotainment system ■ Self-recorded CD-Rs and CD-RWs Maximum folder structure depth: 11 CDC 400: the CD player's changer are more vulnerable to mishandling levels. can take a maximum of 6 CDs. than prerecorded CDs. Correct Maximum number of MP3/WMA Important information about audio handling, especially in the case of files that can be saved: 1000.
  • Page 41 Infotainment system ■ Self-recorded CD-Rs and CD-RWs Folder structure depth: max. 64 Usage may not play correctly or not at all. levels (recommended: max. CD 500 / DVD 800 In such cases it is not the 8 levels). equipment that is at fault. Number of playlists: max.
  • Page 42 Infotainment system The Audio CD or Audio MP3 menu is Track search forward or backward To play all tracks in random order: set opened and CD/DVD replay is Shuffle songs (RDM) to On. Briefly press sor u button and started. then press sor u button again To select a track on the audio CD: and keep pressed until the desired...
  • Page 43 Infotainment system Select a folder or playlist and then If there is a CD in the CD player, CD Note select the desired track. replay is started. The currently played CD is marked by i. Depending on the data stored on the Removing a CD/DVD audio CD or MP3 CD differing Insert a CD with the printed side up...
  • Page 44 Infotainment system To select a specific CD for replay Changing the folder level Press the multifunction knob to open there are the following options. the audio CD related menu. (only CD 300, MP3 replay) Using the numeric buttons 1...6 To play all tracks in random order: set Press the button g or e to change Press one of the numeric buttons 1...6 Shuffle songs to On.

  • Page 45: To Select Track From Folder/Playlist

    Infotainment system AUX input To select a track from a folder or Press the multifunction knob and then playlist (if available): select Playlists/ select Search to display the options Folders. available. General information Select a folder or playlist and then The search process on the MP3 CD select the desired track.

  • Page 46: Usb Port

    Infotainment system USB port Usage CD 300 / CD 400 / CDC 400 CD 500 / DVD 800 General information CD 500 / DVD 800 Press the AUX button (CD 300 / CD 400) / CD/AUX button (CDC 400) Press the CD/AUX button once or once or several times to activate the several times to activate the AUX AUX mode.
  • Page 47 Infotainment system Those devices are operated via the WMA files can only be played back There may be problems with controls and menus of the safely if they were created with operation and function in the following Infotainment system. Windows Media Player version 8 or situations: later.

  • Page 48: Playing Saved Audio Files

    Infotainment system Devices connected to the USB port Playing saved audio files iPod are operated via the controls and CD 500 / DVD 800 menus of the Infotainment system. Note MP3 player / USB drives The socket must always be kept clean and dry.
  • Page 49 Infotainment system iPod functions CD 300 / CD 400 / CDC 400 Operation and the screen displays are described for USB drives only. Operation of other devices like iPod or Zune is mainly the same. Selecting tracks using the USB menu Depending on the data saved, there Press the AUX button (CD 300 / CD are various options for the selection...
  • Page 50 Infotainment system Navigation The search process on the USB Caution device may take several minutes. During this time the station last played General information The usage of the navigation will be received. The navigation system will reliably system does not release the driver To play all tracks in random order: set guide you to your destination without from the responsibility for...
  • Page 51 Infotainment system The system will also work with poor If there is a traffic problem during automatically. It may be necessary to GPS reception, however, the active route guidance, depending on delete other map material from the accuracy of the determination of the the pre-settings, a message appears system's memory.
  • Page 52 Infotainment system ■ Only use map CDs/DVDs approved Usage Loading a map CD/DVD by the vehicle manufacturer. The To load additional map material for Control elements Infotainment system will not read a country, push the map CD/DVD with map CDs/DVDs from other The most important navigation- the labelled side upward into the CD/ manufacturers.
  • Page 53 Infotainment system Information in the top line ■ Below the arrow symbol: the name The following options are available: of the current street to follow. ■ Navigation volume ■ Above the arrow symbol: the name ■ TMC settings of the street to follow after the next ■...
  • Page 54 Infotainment system To test the current settings: select Delete lists Volume test. TMC settings Select Infotypes to open a submenu with various options to define whether and which traffic message infotypes are to be displayed on the active route guidance map. When User defined is selected the infotypes, that are to be displayed, can be defined.

  • Page 55: Destination Input

    Infotainment system Route guidance is not possible at the Destination input ■ Points of interest: selection from same time as maps are loaded or a list of points of interest Press the DEST button to open removed. (restaurants, hotels, petrol stations, a menu with various options for the etc.) near the current position, the The duration of the loading/removing...
  • Page 56 Infotainment system Entering an address using the letter Aa : Upper, lower case. function j : List function - once two letters Select City: category. Using the have been entered, in some cases multifunction knob, successively just one letter, all names available mark and accept the letters for the city with these letters are displayed.
  • Page 57 Infotainment system After completing the address entry Select Start navigation or Store (in Select Automotive & Petrol Stations select Start navigation 3 61 or address book). and then Petrol stations. Store (in address book). A menu is displayed that allows Selecting a point of interest further refinement of the petrol station Selecting an address from the...
  • Page 58 Infotainment system After selection of Fuel type a list is displayed with all fuel types available (in addition to petrol) at petrol stations in the area. The number of petrol stations can be reduced by marking at least one fuel type.
  • Page 59 Infotainment system After the selection of a point of Select from map interest: select Start navigation Selection of points of interest from the 3 61 or Store (in address book). navigation map. Description 3 54 Around destination Selection of points of interest close to Search by name the destination entered.
  • Page 60 Infotainment system After the selection of a city/point of Press the multifunction knob to Turn the multifunction knob to enter interest: select Start navigation confirm the selection. the desired degrees of latitude. 3 61 or Store (in address book). After completing the address entry Press the multifunction knob to select Start navigation 3 61 or confirm the entry.
  • Page 61 Infotainment system Press the DEST button and then A list of all found petrol stations is select Travel guide. displayed. Below that list information on the currently selected petrol station is shown: direction to follow, distance to petrol station, fuel types available (in addition to petrol).
  • Page 62 Infotainment system Select Store to save the address in Selecting an address from the the address book. address book The menu Enter name is displayed with the entered address as default name. Enter an address using the letter function 3 54. Press the DEST button, select Address book and then select the desired address name.
  • Page 63 Infotainment system Functions with route guidance inactive Entering/selecting a new destination Depending on preselected filter 3 54. criteria (3 Navigation options, Route criteria) either all TMC traffic Activating route guidance Start navigation messages or only those along the Select Start navigation. Select Start navigation to display the selected route are displayed.
  • Page 64 Infotainment system ■ Avoid tunnels Select Recalculation after confirmation if the route needs to be ■ Avoid ferries recalculated not before the Configuration of dynamic route corresponding prompt has been guidance confirmed. Information on dynamic route Display route guidance guidance 3 69. The following options are available for the display of the route guidance: ■...
  • Page 65 Infotainment system Using the Popup information option, Select the map orientation (North up/ ■ Latitude you can select whether route Head up) and dimension (2D/3D) on ■ Longitude guidance information from the the map display (3D only available for ■ Map display navigation is to be displayed in popup DVD 800).
  • Page 66 Infotainment system A tour makes it possible to enter After selecting New tour, enter Adding intermediate destinations to a series of destinations for driving to a name for the tour using the letter the tour one after the other. This function is function 3 54.
  • Page 67 Infotainment system Select an option for destination input Starting a tour To start the route guidance for the and then select/enter the desired selected tour: select Start tour. intermediate destination 3 54. To start the route guidance from a certain intermediate destination of the selected tour: select Start tour from.
  • Page 68 Infotainment system Select Show tour to display a list with To insert the cut out destination Functions for active route all intermediate destinations on the before another destination: mark this guidance selected tour. destination and then press the multifunction knob. Editing a tour Delete waypoints Select a tour in the Tours menu and...
  • Page 69 Infotainment system Route information Destination information Route blocking Description 3 Functions with route The following information can be The following options are available to guidance inactive. accessed on the Route information manually exclude certain areas/route menu: sections from the route guidance: Overview current route ■...

  • Page 70: Dynamic Guidance

    Infotainment system By distance Tours By setting a distance the section of (only DVD 800) route from the current position to the Description 3 Functions with route set distance can be excluded from the guidance inactive. route guidance. Repeat last navigation message Press the RPT button to repeat the last route guidance message.
  • Page 71 Infotainment system Nearby traffic problems are also Dynamic route guidance only works if reported if route guidance is not traffic information is received via the active. RDS-TMC traffic information system. If route guidance is active, the system The possible delay due to a traffic continuously checks, based on the problem calculated by the traffic information, whether it would...
  • Page 72 Infotainment system Symbols overview...
  • Page 73 Traffic jam 21 Pontiac dealer 38 Destination Narrow lanes 22 Saab dealer 39 Traffic message 23 Saturn dealer 40 Ferry Road works 24 Vauxhall dealer Slippery road 25 Airport Smog 26 Amusement park 10 Snow 27 City 11 Storm 28 Bank...
  • Page 74 Infotainment system...
  • Page 75 Infotainment system Voice recognition Explanation Explanation Border Harbour General information Tunnel Mountain pass The speech recognition of the Phone portal enables you to operate several Kiosk Museum functions of the mobile phone via voice input. It recognises commands Food Car rental and numeric sequences Hotel/motel Travel information...

  • Page 76: Phone Control

    Infotainment system To ensure that conversations inside ■ Do not enter any commands for ■ "Directory" the vehicle do not lead to some time. ■ "Pair" unintentional triggering of the mobile ■ After the third unrecognised ■ "Select device" phone, the speech recognition does command.
  • Page 77 Infotainment system Recognition works best, if a pause of without knowing the prefix for calls ■ "Help" at least half a second is made after made abroad in that country. Then ■ "Cancel" every three to five digits. The say the required country code. Example of a dialogue Infotainment system then repeats the Example of a dialogue...
  • Page 78 Infotainment system ■ "Redialing" both name inputs, otherwise the Voice output: "Please, say the speech recognition will reject the number to save" ■ "Help" inputs. (for number input see the dialogue ■ "Cancel" A maximum of 50 voice tags can be example for Entering a telephone Example of a dialogue stored in the telephone book.
  • Page 79 Infotainment system Listening to stored names Voice output: "Do you want to add or User: "Yes" delete a device?" The voice output of all stored names Voice output: "Do you want to pair the (voice tags) is started with the User: "Add"...
  • Page 80 Infotainment system Phone Important information for 9 Warning operation and traffic safety General information Use of the hands-free facility while 9 Warning The Phone portal provides you with driving can be dangerous because the possibility of having mobile phone your concentration is reduced Mobile phones have effects on conversations via a vehicle when telephoning.
  • Page 81 Infotainment system You will find further information about Operating the speech recognition n, x: end/reject call, deactivate the specification on the Internet at speech recognition. Do not use the speech recognition in http://qualweb.bluetooth.org. emergencies, because in stress The Phone portal can be operated Additionally, the Phone portal situations your voice can change so optionally via speech recognition...
  • Page 82 Infotainment system Telephone specific adapters First, lower the front side of the adapter as shown in the above figure. If you are using a telephone specific adapter, the mobile phone is operated via the external antenna. The adapter also serves as a charging station.
  • Page 83 Infotainment system Then lower the top edge. An Inserting the mobile phone engaging sound must be audible when the mobile phone engages. To remove, press the unlocking button on the adapter and lift the top edge of the phone first. Mobile phones with connection interface on the lateral edge Installing the adapter...

  • Page 84: Bluetooth Connection

    Infotainment system Information such as a telephone CD 500 / DVD 800 book, call lists, the network operator's Bluetooth menu name and field strength can be transferred. The functionality can be restricted depending on the telephone type. To be able to set up a Bluetooth connection with the Phone portal, the Bluetooth function of the mobile phone has to be activated and the...
  • Page 85 Infotainment system Device list Handsfree mode Connecting a mobile phone as When the mobile phone is added as a handsfree device When a mobile phone is connected to a handsfree device the user can the Phone portal via Bluetooth for the make or receive calls and use other first time, the mobile phone is saved functions via the Phone portal.
  • Page 86 Infotainment system As soon as the Phone portal has Select Change Bluetooth code. On Select the desired mobile phone from detected the mobile phone, the the menu displayed, edit the actual the list. The SAP passcode prompt is connection set-up can be confirmed. Bluetooth code and accept the shown on the Infotainment display modified code using OK.
  • Page 87 Infotainment system Enter the displayed SAP passcode in Connecting a mobile phone saved in Removing a mobile phone from the the mobile phone (without spaces). the device list device list The mobile phone PIN code is shown Select the desired mobile phone from on the Infotainment display.
  • Page 88 Infotainment system Note For details on network services CD 300 / CD 400 / CDC 400 This option depends on the configuration refer to the mobile Bluetooth menu individual network provider. phone manual or enquire with the mobile network provider. Changing the PIN code Select Change PIN.
  • Page 89 Infotainment system Device list Handsfree mode Connecting a mobile phone as When a mobile phone is connected to When the mobile phone is added as a handsfree device the Phone portal via Bluetooth for the a handsfree device the user can first time, the mobile phone is stored make or receive calls and use other in the device list.
  • Page 90 Infotainment system As soon as the Phone portal has Select Change Bluetooth code. On Select the desired mobile phone from detected the mobile phone, the the menu displayed, edit the actual the list. The SAP passcode prompt is connection set-up can be confirmed. Bluetooth code and accept the shown on the Infotainment display modified code using OK.
  • Page 91 Infotainment system Enter the displayed SAP passcode in Connecting a mobile phone saved in Removing a mobile phone from the the mobile phone (without spaces). the device list device list The mobile phone PIN code is shown Select the desired mobile phone from on the Infotainment display.

  • Page 92: Emergency Call

    Infotainment system Note For details on network services Emergency call This option depends on the configuration refer to the mobile individual network provider. phone manual or enquire with the 9 Warning mobile network provider. Changing the PIN code Connection setup cannot be Select Change PIN.
  • Page 93 Infotainment system After setup of a connection between 9 Warning 9 Warning the mobile phone and the Infotainment system the mobile Bear in mind that you can make Do not end the call until you are phone data is transmitted to the and receive calls with the mobile requested to do so by the Infotainment system.
  • Page 94 Infotainment system Dialling a telephone number Entering a number manually If the SIM card or telephone are different, the telephone book is reloaded. This process can take a few minutes depending on the phone model. Selecting a telephone number from the telephone book With the telephone main menu active, Select Enter number, then enter the...
  • Page 95 Infotainment system Call lists Messaging functions After having performed the preselection: select the desired entry Via the menu Call lists the incoming, When the mobile phone is paired in the telephone book to display the outgoing and missed calls can be using the SAP mode, messages can numbers saved under this entry.

  • Page 96: Tone

    Infotainment system Incoming call ■ Switch calls: switch between calls, Dialling a telephone number if there are several calls. When there is an incoming call a menu is displayed for you to accept ■ Mute call: mute a call. or decline the telephone call. Note Select the required option.
  • Page 97 Infotainment system Entering a number manually If the SIM card or telephone are different, the telephone book is reloaded. This process can take a few minutes depending on the phone model. Selecting a telephone number from the telephone book After having performed the preselection: select the desired entry Select Enter number and then enter in the telephone book to display the...
  • Page 98 Infotainment system Call lists Incoming call When there is an incoming call a menu is displayed to accept or decline the telephone call. Select required option. Functions during a telephone call If you currently have a telephone call, press the multifunction knob to open a submenu.

  • Page 99: Mobile Phones And Cb Radio

    Infotainment system ■ Switch calls: switch between calls, Recommendations for fault-free For reasons of safety, do not use the if there are several calls. operation: phone while driving. Even use of a handsfree set can be a distraction ■ Mute call: mute a call. ■...

  • Page 100: Table Of Contents

    Index Activating CD/DVD player.... 40 Favourite lists....... 25 Activating speech recognition..75 Activating the navigation system. . 51 General information....Activating the radio....... 23 ....1, 38, 44, 45, 49, 74, 79 Autostore lists....... 24 Guidance ........61 BACK button......... 13 Handsfree mode......

  • Page 101: Tone Settings

    Radio data system (RDS) .... 32 Updating station lists....27 RDS..........32 Usage....11, 23, 40, 45, 51 Recharging the phone battery..79 Using the address book....60 Regionalization......32 Using the AUX input..... 45 Retrieving stations....24, 25 Using the CD/DVD player..... 40 Route guidance......

This manual is also suitable for:

2010 meriva infotainment system

Table of Contents