Rear Panel - Tascam US-122 Owner's Manual

6
DIRECT MONITOR level
control
Adjusts the level of the
direct monitoring signal, when this is
enabled.
7
L and R input level
controls
Input level adjustment.
Rotate clockwise to increase the input
level of audio sources.
8
MIC/LINE / GUITAR
switches
Switch inputs individu-
ally between mic/line level and Hi-Z
(guitar) level.
9
SIGNAL indicators
the presence of an audio signal on the
respective channel (specifically, when
the input level exceeds -37 dBFS).
OL indicators
Indicate an overload of
the input level to the respective channel
(specifically, a level of -2.5dBFS).

Rear Panel

B
USB jack
Input for USB connec-
tion (USB 1.1) to host computer.
C
MIDI OUT
MIDI output
D
MIDI IN
MIDI input,
2 – Controls and indicators
A
+48V power to the microphone inputs to
allow powering of condenser micro-
phones.
NOTE
NOTE
Only use the phantom powering with con-
denser microphones which need it. Keep
this switch in the
other kinds of equipment connected to the
XLR inputs.
To avoid noise and possible damage to
equipment, turn down the input
controls when switching the phantom
power on and off.
Indicate
Also note that this setting consumes power.
If you are operating the unit with a bat-
tery-powered laptop computer, this will
reduce the battery life of the computer.
B C D
E
anced (RCA) analog audio outputs.
F
reo headphone output.
PHANTOM switch
OFF position with all
E F
OUTPUT L/R jacks
PHONES jack
Standard 1/4" ste-
TASCAM US-122 —
Switches
LEVEL
Unbal-
7