Setting The Sample Rate And Bit Depth; Input Enabling - Tascam US-122 Owner's Manual

6 – Interfacing with your Audio Software

Setting the Sample Rate and Bit Depth

The US-122 supports sample rates of
44.1kHz and 48kHz. In the Audio
Control Panel , select the pull-down
menu for Sample Rate and select either
44.1 kHz or 48 kHz .

Input Enabling

You will need to enable the inputs on
Cubasis. Open the Audio Input window
(see the illustration here) and select one
mono track or a stereo pair.
Note that Cubasis supports only one
input for recording (though this can be a
mono or stereo track).
The US-122 control protocol includes
two separate drivers for 16-bit or 24-bit
operation. This selection is made in the
Audio Control Panel
tion).
NOTE
The bundled Cubasis VST supports only 16-
bit audio. If you want to record in 24-bit
mode you will need to upgrade to Cubase
VST or another application that supports
24-bit audio.
Then select the inputs on Cubasis' inter-
nal mixer. If you're recording a mono
input, left click on the input selector
above the channel strip and select the
desired input L or R . If you're recording a
stereo track, the inputs will both be
selected automatically Verify that the
designated channels' inputs ( IN ) are
selected, and the associated channels are
receiving signal.
TASCAM US-122 —
(see the illustra-
21