Rear Panel; Connecting The Usb Cable - Tascam US-322 Quick Start Manual

are connected, the signal will not be correctly input to the
US-322/366.

Rear Panel

Computer
USB
Game device
CD Recorder
CAUTION
USB 1.1 is not supported.
NOTE
The US-366 DIGITAL IN/OUT connectors support simulta-
neous 24-bit/192kHz input and output.
Making unit settings
On the bottom panel, the US-366 has DIGITAL IN, LINE I/O
and MODE switches, and the US-322 has a MODE switch.
CAUTION
Before changing these settings, quit the application and
disconnect the USB cable from the unit.
1 DIGITAL IN switch (only US-366)
When using a coaxial cable for digital input, set this
to COAXIAL. When using an optical cable, set this to
OPTICAL.
NOTE
You cannot use the coaxial and optical inputs at the same
time.
Powered speakers or
ampli er and speakers
2 LINE I/O switch (only US-366)
Set this to OUTPUT to use the RCA jacks on the rear panel
for output, or set it to INPUT to use them for input.
3 MODE switch
Use to set whether or not the mixed sound input into this
unit and output from the computer are returned to the
computer. Set according to the application.
MULTI TRACK mode
At the same time that each input enters the mixer,
their signals are sent by separate channels to the
computer. They are output in stereo from the mixer,
however, so they can be listened to using speakers or
headphones.
Example: Use with a DAW such as Cubase or similar
software
Mic Guitar
MIC LINE/GUITAR
Mixer
US-366
STEREO MIX mode
Each input is sent to the mixer, and the stereo output
of the mixer is sent by USB to the computer. In
addition, the mixer output can also be listened to
using speakers or headphones.
Example: Use for live Internet broadcasts
Mic Guitar
MIC LINE/GUITAR
Mixer
US-366

Connecting the USB cable

After completing the above settings, connect the USB cable.
CAUTION
USB 1.1 is not supported.
Game device
Computer
DIGITAL
USB
Headphone
PHONES
Game device
Computer
DIGITAL
USB
Live Internet
broadcast
Headphone
PHONES
5
TASCAM US-322/366