6 – Interfacing with your Audio Software
This section is intended to present the
basic concepts needed to interface the
US-122 with the bundled Cubasis VST
application.
Selecting the US-122 as your Audio Device
Audio Control Panel
In Cubasis, open the Audio Control
Panel
. It's located in the Audio pull-
down menu, under System . Select the
ASIO Device
pull-down menu, and select
In the Audio Control Panel , you can
select the number of audio channels you
wish to use, as well as the sampling rate,
ASIO Control Panel
In the Audio Control Panel , click on the
button marked ASIO Control Panel . The
US-122 Control Panel will appear. Refer
20
— TASCAM US-122
This discussion, however, is not intended
to replace your software's user's manual.
If you've got questions specific to Cuba-
sis, please refer to the Cubasis User
Manual for further detail.
ASIO US-122 Driver
. If your software
(for example, the bundled Cubasis) only
supports 16-bit recording, a 16-bit driver
has also been included.
Disk Cache settings, and MIDI to Audio
offset. See the Cubasis manual for more
information on these settings.
to "The US-122 Control Panel" on
page 18 for information on these set-
tings.