Recording With Cubase Le 4; Input Setting - Tascam US-1641 Owner's Manual

IMPORTANT SAFETY PRECAUTIONS 6 – Recording with Cubase LE 4
This chapter explains basic operations for using the US-1641
with Cubase LE 4.

Input setting

1�
Start Cubase LE 4. From the Devices menu, choose
Device Setup.
The system displays the Device Setup window.
2�
In the VST Audio System section in the right side of
the Device Setup window, select US1641 for ASIO
Driver.
3�
From the Devices menu, choose VST Connection.
The system displays the VST Connections window,
which features two tabs: Input and Output.
4�
Select the Inputs tab, then set the input bus.
When you set the input bus, a device port is auto-
matically selected. If necessary, you can change the
device port. The device port pull-down list indicates
all available input ports for the US-1641.
0 0
TASCAM US-1641 TASCAM US-1641
This explanation is not intended to replace the user's manual
for Cubase LE 4. For more information on Cubase LE 4,
please refer to the Cubase LE 4 user's manual.
5�
Select the Outputs tab, then set the output bus.
When you set the output bus, a device port is auto-
matically selected. If necessary, you can change the
device port. The device port pull-down list indicates
all available output ports for the US-1641.
6� From the File menu, choose New Project.
The system displays a window that enables you to
select a template for your new project. Select the
desired template and press the OK button. The
system displays the Select directly window. Specify
the directory in which you wish to save the project,
then click the OK button. The new project will be
created.
NOTE
If you have selected an Empty template, add audio
tracks to the project by selecting Add Tracks from
the Project menu.
You are now ready to begin recording.