Dialing From The Contacts List; Using Speed Dialing - Sanyo S1 Sprint User Manual

Dialing From the Contacts List

To dial directly from a Contacts entry:
1.
Press
Shortcut: From the standby mode, press Contacts (right softkey) to
display the Contacts list.
2.
Highlight the entry you want to call and press
the entry's default phone number.
– or –
To dial another number from the entry, highlight the
name and press
wish to call and press

Using Speed Dialing

With this feature, you can dial your favorite entries using one
keypress for locations 2–9. (See "Assigning Speed Dial
Numbers"on page 100.)
To use speed dial :
From standby mode, press and hold the appropriate key
for approximately two seconds. The display confirms
that the number has been dialed when it shows
"Connecting...".
Note:
Speed dialing may not be available when you are roaming;
when you are roaming off the Sprint National Network, you
must always dial using 11 digits (1 + area code + number).
> Contacts > Find/Add Entry.
, and then highlight the number you
.
Section 2A: Phone Basics
to dial
39