Using Voice-Activated Dialing - Sanyo S1 Sprint User Manual

Using Voice-Activated Dialing

In addition to Sprint Voice Command (see page 179), you can
use a voice dial tag to automatically dial a phone number in
your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Note: Please set the Voice Prompt feature (see page 48) to On
before using Voice-Activated Dialing so that you can hear
the voice instruction from the phone. The default setting is
Off.
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
1.
Press and hold
2.
Follow the system prompts and recite the entry's voice
dial tag into your phone's microphone.
Note: To use the Voice Dial function, you must have stored voice dial
entries. (See "Programming Voice Dial Tags" on page 119.)
118 Section 2H: Using Your Phone's Voice Services
.