Pairing Bluetooth Devices - Sanyo S1 Sprint User Manual

Pairing Bluetooth Devices

Paired Devices
The Bluetooth pairing process allows you to establish trusted
connections between your phone and another Bluetooth
device. When devices are paired, a passcode (sometimes
called a PIN) is shared between devices, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
Note: If Bluetooth is not enabled on your phone, you will be asked
to enable it before you can proceed with the pairing process.
To pair your phone with another Bluetooth device:
1.
Press
(Your phone will display a list of discovered in-range
Bluetooth devices.)
2.
Select the device you wish to pair with and press
3.
Select Add to Trusted.
4.
Enter the PIN and press
device enters the same PIN, the pairing is complete.)
Waiting for Request
If you are going to be using a Dial-Up Network (DUN) profile to
pair with a PC or PDA, you will need to allow the other device
to initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1.
Press
Wait for Request.
2.
Follow the onscreen prompts to enter your PIN and
press
> Tools > Bluetooth > Add New > Search.
> Tools > Bluetooth > Add New >
.
. (When the owner of the other
Section 2I: Using Bluetooth
.
131