Hook Lubrication (Only For Subclasses With Oil Lubrication Of The Hook) - Duerkopp Adler 281 Instruction Manual

Hide thumbs Also See for 281:
Table of Contents

Advertisement

4.1 Hook lubrication (only for subclasses with oil lubrication of the hook)

Maintenance work to be
carried out
Lubrication of the
hook
24
2
Caution: Danger of injury!
Oil can cause skin eruptions.
Avoid protracted contact with the skin.
In the event of contact, thoroughly wash the affected area.
.
Explanation
The oil level shall not fall below the "MIN" level of the oil
reservoir 1.
Top up the oil through the bore hole 2 up to the marking line
"MAX"
To lubricate the hook use only DA 10 lubricating oil or an equivalent oil of the
following specification:
- Special lubricating oil DA 10 / colourless / resistant to light and ageing
resistant / high wear and corrosion protection
- Viscosity / 40°C: 10 mm²/s - ISO VG10
DA 10 is available from DÜRKOPP ADLER retail outlets under the following
part numbers
250 ml container: 9047 000011
1-litre container:
9047 000012
2-litre container:
9047 000013
5-litre container:
9047 000014
1
Operating
hours
8

Advertisement

Table of Contents
loading

Table of Contents