V810 Operating Panel (Optional Equipment); Operating And Display Elements On The V810 Operating Panel; Key Functions On The V810 Operating Panel - Duerkopp Adler 275 Instruction Manual

7.2 V810 operating panel (optional equipment)

7.2.1 Operating and display elements on the V810 operating panel

7.2.2 key functions on the V810 operating panel

Functions can be turned on and off by briefly pressing the keys on the operating panel.
The functions are effective on machine only if the relevant devices (e.g. magnetic or
electro-pneumatic sewing-foot lift) are present.
Key Function
1 double starting bar tack on
starting bar tack on
single starting bar tack on
2 double ending bar tack on
ending bar tack on
single ending bar tack on
3 auto. foot lift on halt in seam on
auto. foot lift on halt in seam on
auto. foot lift after thread cut on
auto. foot lift after thread cut on
4 basic needle position = down
basic needle position = up
A suppress bar tack or invoke bar tack
if starting or ending bar tack is switched on,
pressing the key switches the next bar tack off
if starting or ending bar tack is switched off,
pressing the key switches the next bar tack on
Display
right arrow above the key on
both arrows on
left arrow above the key on
right arrow above the key on
both arrows on
left arrow above the key on
left arrow above the key on
left arrow above the key on
right arrow above the key on
right arrow above the key on
left arrow above the key on
right arrow above the key on
no display
GB
35