Connection Sockets On The Da220C Control; Connecting The Da220C Control - Duerkopp Adler 275 Instruction Manual

6.4 Connection sockets on the DA220C control

1
2
B41

6.5 Connecting the DA220C control

–
Plug the set-point generator (pedal) lead into socket B80 of the control.
–
Plug the lead of the motor sensor 2 into socket B2 of the control.
–
Plug the lead 1 of the motor into socket B41 of the control.
–
Plug the machine lead into socket A of the control.
–
Lay all leads through the cable conduit.
–
Plug the lead of the operating panel (optional equipment) into socket B776.
B2
A
B80
B776
GB
21