Replacing The Feed Roller - Duerkopp Adler 271 Service Manual

2.7.7 Replacing the feed roller

1 2 3
IMPORTANT
If a Vulkollan roller is replaced by a steel roller or vice versa, the lower
end position must be re-adjusted (see section 2.7.3).
If a steel roller is fitted, the fabric deflector must be removed.
If the 15mm-wide rubber roller is being used, the broad fabric deflector
(order no.: 0273 000620) must be fitted.
Caution: danger of injury
Turn off the main switch.
The feed roller must be replaced with the sewing machine switched off.
Replacing the roller
–
Remove nut 1.
IMPORTANT: this nut has a left-handed thread.
Lock axle 3 at the other end with a screwdriver.
–
Replace feed roller 2.
–
Replace nut 1.
item order no.:
4 0933 005763
5 0933 005737
6 0933 005738 a
7 0933 005737 a
8 0933 005725
4 5
description
steel roller 9 mm
steel roller 15 mm
steel roller 15 mm, 2 mm saw-tooth
rubber roller 15 mm
Vulkollan roller 9 mm
6 7 8
21