8.2 Positioning the fixed blade
1
2
3
Regulation and inspection
The fixed blade 3 must lie in the direction of the arrow on the screw 1
(see sketch).
Sharpened blades must be aligned as described in section 7.3.
Caution: danger of injury
Turn off the main switch.
The fixed blade may only be adjusted with the sewing machine
switched off.
Adjustment
–
Unscrew cutting-pressure screws 2.
–
Undo screw 1 from below.
–
Push blade 3 in the direction of the arrow against screw 1.
–
Partially tighten screw 1 from above.
–
Adjust the cutting pressure (see section 8.6).
–
Fully tighten screw 1 from below.
1
1
2
3
35