Dual AXXERA XDMA7200 Installation & Owner's Manual page 22

Bluetooth
Microphone Mute
Audio Transfer
Call Waiting
Call Hold
Function
Bluetooth
AUTO CON
Auto Connect
AUTO ANS
Auto Answer
Speaker
Output (FRONT/ALL)
XDMA7200
Operation
®
During a Phone Call
Volume Turn the volume knob to adjust the volume level during a
phone call. Bluetooth mode has a separate volume level
from the main volume of other modes. The XDMA7200 will
remember the volume level in Bluetooth mode and always
return to the last volume level for each phone call.
Press MUTE during a phone call to turn the XDMA7200's
external microphone off. Press MUTE again to resume
microphone operation.
Press DISP during a phone call to transfer the call from the
XDMA7200 to the cell phone. Press DISP again to toggle
the audio back to the XDMA7200.
During a phone call, if there is a second incoming call, press
to place the first call on hold and switch to the second
phone call. Press
During a phone call, when there are no additional incoming
calls, press
resume the phone call.
Note: Audio transfer, call waiting and call hold must be
supported by the mobile phone and service provider to
function properly.
Bluetooth Setup Menu Options
Options
BL'TOOTH
Enables/disables Bluetooth functionality.
(ON/OFF)
Set to ON to allow a Bluetooth device to connect automatically.
(ON/OFF) Setting to OFF requires manually connecting the device.
When set to ON, every incoming phone call will automatically be
answered after 2-3 rings. When set to OFF, the
(OFF/ON)
be pressed to answer incoming phone calls.
Set to FRONT to direct the Bluetooth audio output to the front
BT SPRKS
speakers only. Set to ALL to enable Bluetooth audio to output
from all 4 speakers.
again to switch back to the first call.
to place the call on hold. Press
Action
22
again to
button must