Unattended Installation Under Windows* Xp / Windows 2000; Intel Storage Utility; Description; Create Volume Manually - TYAN Tiger i7322 S5351 User Manual

Table of Contents

Advertisement

Tiger i7322 S5351

4.15 Unattended Installation Under Windows* XP / Windows 2000

To install the Intel Application Accelerator RAID Edition as outlined in the Microsoft* document
"Deployment Guide Automating Windows NT Setup," use the supplied TXTSETUP.OEM file
included in the application package and insert the lines below into the UNATTEND.TXT file.
This method is available for Windows* XP. For Windows XP, the IASTOR.INF, IASTOR.SYS,
IASTOR.CAT,
and
compressed .CAB file. To extract these files, run 'C:\SETUP.EXE -A -P C:\<path>' as
described in the 'Advanced Installation Instructions' section of the README.TXT.)
Windows* XP / Windows 2000:
// Insert the lines below into the UNATTEND.TXT file
[MassStorageDrivers]
"Intel(R) 6300ESB SATA RAID Controller" = OEM
[OEMBootFiles]
iaStor.inf
iaStor.sys
iaStor.cat
Txtsetup.oem
Place iaStor.inf, iaStor.sys, iaStor.cat, and Txtsetup.oem in the following folder:
<SystemRoot>:\i386\$OEM$\Textmode

4.16 Intel Storage Utility

4.16.1 Description

The Intel Storage utility is a Windows*-based application that provides management
capabilities and detailed status information for storage devices and RAID arrays.

4.16.2 Create Volume Manually

The Intel Application Accelerator RAID Edition offers the ability to create a RAID volume. This
option should be used if you are using a third bootable device such as an IDE or SCSI hard
drive – in addition to using two Serial ATA hard drives. One benefit of using a third bootable
device and creating a RAID volume is that the operating system is not located on the RAID
volume. Should something happen to the RAID volume, the operating system should not be
impacted.
The 'Create RAID Volume' option is not selectable unless a third
bootable device (such as an IDE or SCSI hard drive) is installed in the
system – in addition to using two Serial ATA hard drives.
Chapter 4: SATA/RAID Setup (for SATA RAID model)
TXTSETUP.OEM
http://www.tyan.com
files
need
to
first
Note
4-25
be
extracted
from
the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents