Using The Intel Raid Option Rom - TYAN Tiger i7322 S5351 User Manual

Tiger i7322 S5351

4.7.3 Using the Intel RAID Option ROM

Creating, Deleting, and Resetting RAID Volumes
The Serial ATA RAID volume may be configured using the RAID Configuration utility stored
within the Intel RAID Option ROM.
During the Power-On Self Test (POST), the following message will appear for a few seconds:
The 'Drive Model', 'Serial #', and 'Size' listed in your system can differ
from the following example.
After the above message appears, press the <Ctrl> and <i> keys simultaneously to enter the
RAID Configuration Utility.
4.7.4 Create RAID 0 or RAID 1 Volume
The following procedure should only be used with a newly-built system or
if you are reinstalling your operating system. The following procedure
should not be used to migrate an existing system to RAID 0.
After pressing the <Ctrl> and <i> keys simultaneously, the following window will appear:
Chapter 4: SATA/RAID Setup (for SATA RAID model)
Intel (R) RAID for Serial ATA - RAID BIOS v3.6.0.6277
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
RAID Volumes:
None defined.
Non - RAID Disks:
Port Drive Model Serial #
0 WDC WD2500JD-00F WD-WMAEH2201346
1 WDC WD2500JD-00F WD-WMAEH2201823
Press <CTRL-I> to enter Configuration Utility..
Intel (R) RAID for Serial ATA - RAID Configuration Utility
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model Serial #
0 WDC WD2500JD-00F WD-WMAEH2201346
1 WDC WD2500JD-00F WD-WMAEH2201823
[ ]-Select
http://www.tyan.com
Note
Size Status Bootable
Normal
232.8GB
232.8GB Normal
Note
Size
232.8GB
232.8GB
[ESC]-Exit [ENTER]-Select Menu
4-6
Yes
Yes
v3.6.0.6277
Status Bootable
Normal Yes
Normal Yes