Writing Cd/Dvds On Dvd Super Multi Drives - Toshiba Portege R500 User Manual

Writing CD/DVDs on DVD Super Multi drives

You can use the DVD Super Multi drive to write data to either CD-R, CD-
RW, DVD-R, DVD-RW, DVD+R, DVD+RW or DVD-RAM discs. TOSHIBA
Disc Creator and Ulead DVD MovieFactory are provided as writing
software with this computer.
■
Please refer to the
of writable CD and DVD discs that can be supported by this computer.
■
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
■
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.
■
When the power of the optical disc drive is off, the disc tray will not
open even if the eject button is pushed. Use the ODD to turn the power
of the optical disc drive on. Please refer to Chapter 5,
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket. It is
possible that, if data is written while powered by the battery pack, the write
process may sometimes fail due to low battery power - in these instances
data loss may occur.
Important message
Before you write or rewrite to any of the media supported by the DVD
Super Multi Drive, please read and follow all of the setup and operating
instructions in this section. If you fail to do so, you may find that the DVD
Super Multi drive may not function properly, and you may fail to write or
rewrite information successfully - this may cause you to either lose data or
incur other damage to the drive or media.
Legal Footnotes
TOSHIBA does not bear responsibility for the following:
■
Damage to any CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW
or DVD-RAM disc that may be caused by writing or rewriting with this
product.
■
Any change or loss of the recorded contents of CD-R, CD-RW, DVD-R,
DVD-RW, DVD+R, DVD+RW or DVD-RAM media that may be caused
by writing or rewriting with this product, or for any business profit loss or
business interruption that may be caused by the change or loss of the
recorded contents.
■
Damage that may be caused by using third party equipment or
software.
User's Manual
Writable discs, Chapter 2 for details about the types
Operating Basics
Hot keys.
4-13