About The Power Supply - Steinberg CI1 Operation Manual

Introduction
Mac OS X
OS: Mac OS X 10.5.5 or later/
Mac OS X 10.6.x
CPU:
Intel processor
Memory:
1GB or more
Display Resolution:
1280 x 800 — full color
Interface: Equipped with a USB terminal
Hard Disk: Free disk space of 1GB or more;
high-speed hard disk
NOTE
• A DVD drive is required for installation.
• User registration for the software included in
STEINBERG SOFTWARE PACKAGE FOR CI1 re-
quires an Internet connection.
• Note that the system requirements may be slightly
different from those described above depending on
the particular operating system.
• The audio input and output functions of the CI1 also
work properly on Mac OS X 10.4.11. Install TOOLS
for CI1 to use the functions.
8
CI1 Operation Manual

About the power supply

Power supply
The power of the CI1 is supplied only from the
computer via a USB cable. A power cable is not
necessary.
Precautions when using the USB
terminal
Be sure to observe the following points when
connecting to the computer's USB interface.
Failing to do so may result in the computer
freezing or shutting down, as well as corruption
or even loss of data. If the device or computer
does freeze, restart the application or computer.
NOTICE
• Be sure to wake the computer from sleep/sus-
pended/standby mode before making a connection
to the computer's USB terminal.
• Always quit all applications running on the com-
puter before connecting or disconnecting the USB
cable.
• When connecting or disconnecting the USB cable,
be sure to set the MASTER control to the mini-
mum.
• Wait at least 6 seconds between connecting or dis-
connecting the USB cable.