Steinberg CI1 Operation Manual page 15

Mac OS X
Software Installation
1.
Disconnect all the devices other than
the mouse and keyboard from the com-
puter.
2.
Insert the TOOLS for CI1 CD-ROM into
the CD-ROM drive of your computer.
3.
Open the CD-ROM, then double-click
the file "Yamaha Steinberg USB
Driver.mpkg."
4.
A dialog box appears asking if you want
to install the software. Click [Continue].
The "Welcome to the Yamaha Steinberg USB
Driver Installer" window appears.
5.
Click [Continue].
The "Installation Type" window appears
6.
Click [Install].
The "Authenticate" window appears.
7.
Enter the Administrator name and the
password, then click [OK].
A message appears prompting you to restart
the computer after the installation.
8.
Click [Continue Installation]
The "Install" window appears indicating the in-
stallation progress. When the installation is
complete, the "Summary" window appears.
9.
Click [Restart] to restart the computer.
10.
Connect the CI1 directly to the computer
(without using a hub) by using the in-
cluded USB cable.
Confirming the installation
(Mac OS X 10.5)
For Mac OS X 10.6 users, go on to step 13.
11.
From the hard disk to which the OS is
installed (usually Macintosh HD), click

[Applications] [Utilities], then double-
click [Audio MIDI Setup].
The "Audio MIDI Setup" window appears.
12.
Click [Audio Devices], then select
"Steinberg CI1" from the pull-down
menu in [Properties For].
The current audio settings are shown in the
[Audio input] and [Audio Output] fields.
NOTE
By selecting "Steinberg CI1" for [Default Output] in
System Settings, you can output audio signals of
the system sounds and audio player software (e.g.,
iTunes, etc.) from the CI1.
The installation is now complete.
Confirming the installation
(Mac OS X 10.6)
13.
From the hard disk to which the OS is
installed (usually Macintosh HD), click

[Applications] [Utilities], then double-
click [Audio MIDI Setup].
The "Audio Devices" window appears.
14.
Select "Steinberg CI1" from the list of
audio devices.
The current audio settings are shown in the
right side of the window.
NOTE
By selecting "using this device for sound output" in
the Action menu at the left bottom of the window,
you can output audio signals of audio player soft-
ware (e.g., iTunes, etc.) from the CI1.
The installation is now complete.
Software Installation
15
CI1 Operation Manual