Lenovo ThinkCentre M58p Manual page 25

v Serial Over LAN (SOL) - Disabled / Enabled
If Enabled is selected, the Intel AMT managed client console input or output can
be redirected to management server console.
v IDE Redirection (IDE-R) - Disabled / Enabled
If Enabled is selected, the Intel AMT managed client can be booted from remote
disk images at management server console.
Password Policy
The Password Policy option is used to set up the MEBx password through the
network.
Select Password Policy in Intel AMT configuration menu, see the following figure:
Three options display:
v Default Password Only – You can change the MEBx password through the
network interface, only if the MEBx password has not been modified.
v During Setup and Configuration – You can change the MEBx password through
the network interface only during the setup and configuration process. Once the
setup and configuration process is completed, you can no longer modify the
MEBx password.
v Anytime – You can change the MEBx password through the network interface at
anytime.
Secure Firmware Update
Select Secure Firmware Update in the Intel AMT configuration menu. This option
will allow the user to enable or disable secure firmware updates. Secure firmware
updates will pass through the LMS driver.
When secure firmware update feature is enabled, you are able to update the
firmware by secure method. If secure and local firmware update is disabled, the
user must enable secure firmware update or local firmware update for firmware
update.
Note: Secure firmware update requires an administrator user name and password.
If the administrator user name and password are not provided, the firmware
cannot be updated.
Chapter 5. Intel AMT setup and configuration based on Lenovo ThinkCentre M58p
17