Table of Contents
Advertisement
Problem solving guide
What to do, if . . .
. . . large residues of deter-
gent remain in the dispenser
drawer.
. . . fabric conditioner is not
completely dispensed or too
much water remains in the p
compartment.
. . . grey, greasy particles
cling to washed laundry.
. . . there are white residues
which look like powder deter-
gent on the washing.
. . . liquid detergent does not
give the required result.
46
Cause
The water supply pressure is
too low.
Washing powder used with
water softener tends to become
sticky.
The siphon tube is either
incorrectly positioned or
clogged.
The fabric conditioner channel
is clogged.
Insufficient amounts of
detergent were used to break
down the particles of grease in
heavily soiled laundry.
The detergent contained
compounds (zeolites) to aid
water softening which are not
soluble in water. These have
ended up on the washing.
Liquid detergents do not
contain bleaching agents. They
do not remove fruit, coffee and
tea stains.
Remedy
–
Clean the filter in the water
inlet system.
–
It may be useful to select
"Water plus".
Pour washing powder into the
dispenser before adding any
water softener.
Clean the siphon tube.
Clean the fabric conditioner
channel.
–
Add more detergent.
–
Before washing the next load
run a "COTTONS 95°C"
programme without a load.
(See "Extra cleaning" in
Cleaning and Care).
–
Use detergents containing
no zeolites to re-wash the
load.
–
Liquid detergents usually
contain no zeolites.
–
Try and brush off the
residues with a soft brush.
–
Use a general purpose
washing machine powder
containing a bleaching agent.
–
Pour stain remover (salts)
into the dispenser drawer
compartment j, and liquid
detergent into a dispenser
ball.
–
Never put stain salts and
liquid detergent together in
the dispenser drawer.
Hide quick links:
Advertisement
Table of Contents
