Campbell Hausfeld DG480000CK Operating Instructions Manual

Operating Instructions
Instructions d'Utilisation
Manual de Instrucciones
Notes
Notes
Notas
20
See Warranty on page 5 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
BUILT TO LAST
Description
Detail sanders are designed for
uniform sanding and polishing in
corners and tight spaces. Ideal for flush
sanding along edges This sander has a
built-in dust port for vacuum or dust
bag attachment.
Unpacking
When unpacking this product, carefully
inspect for any damage that may have
occurred during transit.
General Safety
Information
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
defects, or other reproductive harm.
and to PREVENT EQUIPMENT PROBLEMS.
Wear protective gear.
To help recognize this information,
observe the following symbols.
or its power cord contains chemicals
Danger
known to the State of California to
indicates
cause cancer and birth defects or other
an imminently hazardous situation
reproductive harm. Wash hands after
which, if not avoided, will result in
handling.
death or serious injury.
The following safety precautions must
Warning
indicates
be followed at all times along with any
a potentially hazardous situation
other existing safety rules.
which, if not avoided, COULD result in
death or serious injury. 1. Read all manuals
included with this
Caution
product carefully. Be
indicates
thoroughly familiar with
a potentially hazardous situation
which, if not avoided, MAY result in
the controls and the
minor or moderate injury.
proper use of the equipment.
Notice
2. Only persons well acquainted with
indicates
these rules of safe operation should
important information, that if not
be allowed to use this tool.
followed, may cause damage to
equipment.
CALIFORNIA PROPOSITION 65
Safety glasses and ear
protection must be worn
during operation.
You can create dust when you
cut, sand, drill or grind
3. Do not wear loose fitting clothing,
materials such as wood, paint,
scarves, or neck ties in work area.
metal, concrete, cement, or other
Loose clothing may become caught
masonry. This dust often contains
in moving parts and result in serious
chemicals known to cause cancer, birth
personal injury.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2006 Campbell Hausfeld/Scott Fetzer
For parts, product & service information
visit www.chpower.com
Detail Sander
4. Do not wear jewelry when
operating any tool. Jewelry may
become caught in moving parts and
This
result in serious personal injury.
product
5. Always use attachments designed
for use with this tool. Do not use
damaged or worn attachments.
6. Never trigger the tool when not
applied to a work object.
Attachments must be securely
attached. Loose attachments can
cause serious injury.
7. Never point a tool at oneself or any
other person. Serious injury could
occur.
MANUAL
8. Use steady, even pressure when
using tool. Do not force. Too much
pressure can cause tool to overheat.
9. Keep all nuts, bolts and screws tight
and ensure equipment is in safe
working condition.

Specifications

Voltage
Power Rating
Weight
DG480000CK
120V 60Hz
0.8 A
2 lbs.
IN714301AV 12/06