Campbell Hausfeld DG480200CK Operating Instructions And Parts Manual

DG480200CK
Notes
Notes
Notas
16
See Warranty on page 5 for important information about commercial use of this product.
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
BUILT TO LAST
Description
Sheet sanders are designed for the
sanding and polishing of wood, iron,
plastic, and similar materials. This
sander has a dust bag to keep the
working surface clean and dust free.
This sander has a dust-proof switch for
increased durability. The sealed switch
extends the life of the tool by keeping
dust and particulates from entering
into the internal components of the
tool.
Unpacking
When unpacking this product, carefully
inspect for any damage that may have
occurred during transit.
CALIFORNIA PROPOSITION 65

General Safety

DANGER
!
This manual contains information that is
create dust when you cut,
very important to know and understand.
sand, drill or grind
This information is provided for SAFETY
materials such as wood,
and to PREVENT EQUIPMENT PROBLEMS.
paint, metal, concrete, cement, or other
To help recognize this information,
masonry. This dust often contains
observe the following symbols.
chemicals known to cause cancer, birth
Danger indicates
defects, or other reproductive harm.
DANGER
!
an imminently
Wear protective gear.
hazardous situation which, if not
WARNING
!
avoided, will result in death or serious
injury.
power cord contains chemicals known
to the State of California to cause
Warning indicates
WARNING
!
cancer and birth defects or other
a potentially
reproductive harm. Wash hands after
hazardous situation which, if not
handling.
avoided, could result in death or serious
injury.
The following safety precautions must be
followed at all times along with any
Caution indicates a
CAUTION
!
other existing safety rules.
potentially
hazardous situation which, if not 1. Read all manuals
avoided, may result in minor or moderate
included with this
injury.
product carefully. Be
thoroughly familiar with
Notice indicates
NOTICE
the controls and the
important
proper use of the
information, that if not followed, may
equipment.
cause damage to equipment.
2. Only persons well acquainted with
these rules of safe operation should
be allowed to use the tool.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2006 Campbell Hausfeld/Scott Fetzer
For parts, product & service information
visit www.chpower.com
Sheet Sanders
WARNING
!
Safety
You
glasses and ear protection
can
must be worn during
operation.
3. Do not wear loose fitting clothing,
scarves, or neck ties in work area.
Loose clothing may become caught
in moving parts and result in serious
personal injury.
4. Do not wear jewelry when
operating any tool. Jewelry may
This product or its
become caught in moving parts and
result in serious personal injury.
5. Always use attachments designed
for use with this tool. Do not use
damaged or worn attachments.
6. Never trigger the tool when not
applied to a work object.
Specifications
MANUAL
Tool
Voltage
Power Rating
Sanding Surface
Weight
DG480200CK
120V 60Hz
1.5 A
1/4 sheet
3.1 lbs.
IN713700AV 3/06