Table of Contents
Advertisement
Using Your Power Burner
Read all instructions before you operate
We recommend you wash the Power Burner thoroughly with soap and
water prior to lighting it for the first time. Oils are used during the
manufacturing process and some residual oil may still be on the stain-
less steel parts of your Power Burner. Washing will reduce the possibil-
ity of discoloration. We also recommend you keep your Power Burner
covered when not in use. This will minimize the amount of dust and dirt
that accumulates on your Power Burner and extend its life.
Remember to use your Power Burner safely by following these remind-
ers:
•
It is dangerous to use Power Burner in any manner other than for
what it is designed for.
•
Do not use charcoal in the Power Burner.
•
Do not heat sealed containers such as cans or jars on the Power
Burner. Explosion may result resulting in injury or death.
•
Never put combustible material such as paper, cloth, or flammable
liquids on your Power Burner at any time. Do not use the Power
Burner or any area around it to store flammable materials.
•
Never spray water on a hot gas unit. This may damage compo-
nents.
The stainless steel ring placed around the brass burners func-
tions both as a wok ring and as a baffle for the burners. (See
page 15.) Do NOT remove it except for cleaning. It must must
always be in place during operation.
Power Burner Controls
The controls shown below are for the Power Burner. Familiarize your-
self with these controls before using your Cal Flame Power Burner.
Burners
Burners
Outer Ring
Power Burner
LTR50001100, Rev. A
your Power Burner.
Center
Outer Ring
Center
Off
Off
High
High
Low
Low
Grill Knob Operation
Grill Knob Operation
11
www.calflamebbq.com
Advertisement
Table of Contents
