Table of Contents
Advertisement
Installation / Assembly
4
Most cities and counties require permits for exterior construction. In
addition, some communities have codes requiring residential barriers
such as fencing and/or self-closing gates on property to prevent unsu-
pervised access to the property by children under the age of five. Your
dealer can provide information on which permits may be required and
how to obtain them prior to the delivery of your equipment.
We recommend the installation, adjustment and service of your new
Power Burner be performed by LMS qualified installers and service
technicians to ensure proper operation and prevent accidents.
When planning the location of your Power Burner, access to a gas line
should be considered. The location with the shortest gas line run is
recommended.
When determining a suitable location, consider factors such as expo-
sure to wind, proximity to traffic paths, and windows that open into
the home.
Locate the Power Burner only in a well-ventilated area.
If you do not have an updated filler valve on your existing propane tank,
you will need to purchase one at your local hardware store. Without it
you will not be able to attach your tank to your Power Burner or refill
the tank at your local propane refill station.
Converting the Power Burner
IMPORTANT: The Cal Flame Power Burner is manufactured to oper-
ate on liquid propane (LP). However, they can be converted to oper-
ate on natural gas (NG) by an authorized service technician. Consult
your Cal Flame dealer for information on converting your gas Power
Burner. See page 26 for conversion instructions.
Owners must not convert their Power Burner themselves.
Attempting to convert the Power Burner from LP to NG may
result in serious injury and will void the warranty cover-
age.
www.calflamebbq.com
Power Burner
LTR50001100, Rev. A
Advertisement
Table of Contents
