Denon AVR-A100 Addendum Sheet

AV SURROUND RECEIVER
AVR-A100
Thank you for purchasing DENON's product. When you operate the unit, please
read the owner's manual and this sheet.
Addition
v page 68 :
Party mode function
A function has been added when playing back in
party mode that enables attendees to perform
controls such as selecting songs etc.
Also, DENON products that are connected to the
network can control each other.
n Participating in the party mode as
an attendee
1
PARTY
Press .
"Enter Party Mode?" is displayed.
• An error message is displayed when you are not
connected to a network.
2
Press to select "Yes", then press
o p
ENTER .
When you start the party mode, the monitor
of the attendee (child) displays the network
menu screen for the organizer (parent).
3
Press and ENTER to select
uio p
the desired track.
DENON:[AVR-A100] [1/3]
PARTY ATTENDEE
Favorites
Internet Radio
Media Server
The party mode function can only be used on a
combination of DENON devices that are equipped
with the party mode function.
Remote control operation
buttons
ENGLISH
Addendum Sheet
Change
v page 93 :
MANUAL SETUP
The "Network Setup" – "Other" menu was
changed.
GNETWORK SETUPH
NETWORK SETUP
Network Connecting
Other
Rhapsody Account
Napster Account
Network Info
GOTHERH
OTHER
PC Language
Friendly Name Edit
Party Mode Function
Party Start Level
Network Status
Update Notification
Before change
OTHER
PC Language
Friendly Name Edit
Party Mode Function
Party Start Level
Zone Management
Update Notification
After change
Move the cursor
(Up/Down/Left/Right)
Addition
v page 102 :
Zone management function
DENON products that are connected to the network
can control.
The "Device Control" item was added to the
"Network Setup" – "Other" – "Zone Management"
menu.
With "Device Control", the network functions
(Internet radio when the input source is NET/
USB etc) of the device selected in step 2 can be
controlled using this product.
1
Press to select "Network Setup"
ui
– "Other" – "Zone Management"
from the menu, and then press
ENTER
or p .
OTHER
PC Language
Friendly Name Edit
Party Mode Function
Party Start Level
Zone Management
Update Notification
Check the status of other Denon products on
your network and browse the network menu
2
Press to select the device, and
ui
then press ENTER or .
p
ZONE MANAGEMENT
DENON:[AVR-A100]
Confi rm the setting
3
Press to select "Device Control",
ui
and then press ENTER .
The monitor of the unit displays the network
menu for the target device.
DENON:[AVR-A100]
Model AVR-A100
Power ON
Select Source NET/USB
Volume Level -24.0dB
Device Control
Return
Enter
RETURN
4
ENTER
Press and to select
uio p
the desired track.
[1/8]
DENON:[AVR-A100]
REMOTE CONTROL
Favorites
Internet Radio
Media Server
iPod
Flickr
Napster
Pandora
Exit Vol. up Vol. down
MENU CH+ CH-
• When in device control mode,
is displayed on the television screen of the
controlling device, and is displayed
on the television screen of the device being
controlled.
• For information about how to operate, see the
Owner's Manual provided with the product.
The zone management function can only be used
on a combination of DENON devices that are
equipped with the zone management function.
NOTE
The volume of the selected device can be controlled
using this unit, but the volume level is not displayed.
Be careful not to increase the volume too high.