Fostex VF160 Supplement Owner's Manual page 25

On the contrary, when you set the load type to "Select", the load destination program
number for the secondly selected track is same as the firstly selected track. That is, all
selected tracks are loaded to the same program.
11) Press the [ENTER/YES] key.
As with the firstly selected track, the secondly selected track ("02", in this example) is set.
12) Operate the same procedure as above for selecting other tracks.
13) When completing selecting all desired tracks, press the [ENTER/YES] key while
holding down the [RECORD] key.
The display shows "Data Loading!" while the remaining data amount (in MB) is counted
down. You cannot cancel loading once it starts. Wait for a while until loading is completed.
Loading more amount takes more time.
When completing loading, "Completed!" is shown, while the audio CD is automatically ejected
from the CD-R/RW drive.
14) Press the [EXIT/NO] key to exit the setup mode.
VF160 Owner's Manual <V2.0 Supplement>
25