Fostex VF160 Supplement Owner's Manual page 21

Display in the audio CD playback mode
When switching to the audio CD playback mode, the display looks like the ex-
ample below.
By pressing the [DISP SEL] key while holding down the [SHIFT] key,
you can switch the time base.
By pressing only the [DISP SEL] key, you can switch the display mode
in the current time base. See the table below for details.
This section shows the current track number and
name. In this example, "CD01" shows the current track
number is "01". On the right of the track number, the
track name is shown when playing back a CD TEXT
disc (an audio CD containing text information) which
has track title information. If the name is long and ex-
ceeds the display area, it is scrolled in the next row.
When playing back a normal audio CD (which does
not contain text information) available on the market
or burned using the VF160, "No Title" is shown, as
this example.
When an audio CD which has more than one track is
set, pressing the [REWIND/PREV] or [F FWD/NEXT]
key while holding down the [SHIFT] key locates to
the beginning of an appropriate track while the dis-
play shows "Locate: EVT**".
• Time base selection by "[SHIFT] + [DISP SEL]"
Disc elapsed time is shown. The time starts from the beginning of a disc. The loop
ABS
start and end points refers to disc elapsed time.
Track elapsed time is shown. Track time starts from the beginning of each track.
OFFSET
Naturally, at the point each track starts playback, the display shows "00m00s".
MTC (MIDI Time Code) is shown. It has an offset of 59 minutes 57 seconds to
MTC
"ABS 0" (the same offset as the internal HDD playback mode).
• Display mode selection in the current time base by the [DISP SEL] key
When the current time base is ABS:
When the current time base is OFFSET:
When the current time base is MTC:
VF160 Owner's Manual <V2.0 Supplement>
In the audio CD playback mode, only
the level meters for tracks 1, 2 and L/R
master are effective. The playback level
can be controlled using the faders for
tracks 1, 2 and [MASTER].
You can switch between "ABS", "OFFSET" and "MTC IN".
You can switch between "OFFSET" and "MTC IN".
You can switch between "MTC", "OFFSET" and "MTC IN".
MTC IN: Show the MTC time input in the [MIDI IN] jack.
21