Fostex VF160 Supplement Owner's Manual page 23

6) If you agree to the message contents, press the [ENTER/YES] key.
The display changes to show the screen for selecting the load type, on which "One" flashes.
This screen has been newly added with version 2.0. You can select a desired load type from
among the following.
You can select one or more tracks to be loaded. Each selected track is individually
One
loaded to a new program automatically created on the current drive.
You can select one or more tracks to be loaded. All the selected tracks are
Select
individually loaded to a new program automatically created on the current drive.
All the tracks on an audio CD are loaded to a new program automatically created
All
on the current drive.
* "A new program automatically created on the current drive" has the program number one
higher than the current highest program number.
7) Select the desired load type and press the [ENTER/YES] key.
Depending on the selected load type, the display shows as below.
• When selecting "One" or "Select":
The screen as shown below appears.
The left column shows the track numbers (01, 02...) of the audio CD, while "NON" in the
second column shows no program is selected.
" " is shown when more than one track is recorded on the audio CD. It is not shown when
only one track is recorded on the audio CD. If only one track is recorded on the audio CD,
" " is not shown. To select desired tracks to be loaded, go to step 8.
flashing
flashing
• When selecting "All":
All tracks on the audio CD are selected to be loaded, and the screen as shown below appears.
In this screen example, the destination program newly created on the current drive is
"P05". Each track time is also shown.
flashing
When selecting "All", you can start loading tracks to the current drive by pressing the
[ENTER/YES] key while holding down the [RECORD] key.
You can delete an unnecessary track if you want. See <Hint> below about how to do it.
VF160 Owner's Manual <V2.0 Supplement>
23
flashing