Making The Chain Play List By Selecting Desired Programs - Fostex VF160 Supplement Owner's Manual

VF160 Owner's Manual <V2.0 Supplement>

Making the chain play list by selecting desired programs

The following procedure example shows how to enter the five desired programs
(from among 10 programs on the current drive) to steps 1 through 5 in the
chain play list, as below.
1)
2)
3)
4)
: C01 -> program 5 (P05)
: C02 -> program 3 (P03)
: C03 -> program 1 (P01)
: C04 -> program 2 (P02)
: C05 -> program 4 (P04)
While "END" is flashing on the screen, rotate the [JOG] dial to select "P05" and
press the [ENTER/YES] key.
You can select the desired program by rotating the [JOG] dial to the right.
When selecting the program, the first nine characters of the program name is also shown
(in the example below, the name is "#0005").
After selecting "P05" and pressing the [ENTER/YES] key, program 5 (P05) is set to step 1
(C01) of the chain play list and the screen changes as shown below.
Use the [JOG] dial to highlight "C02: END" and press the [ENTER/YES] key.
As with procedure step 1) above, "END" of "C02: END" starts flashing.
While "END" is flashing on the screen, rotate the [JOG] dial to select "P03" and
press the [ENTER/YES] key.
As with procedure step 1) above, program 3 (P03) is set to step 2 (C02) of the chain play list
and the screen changes as shown below.
Set programs to steps 3 through 5 (C03 through C05) of the chain play list with the same
manner as above.
After completing setting all the desired programs to the chain play list, press the
[EXIT/NO] key.
The chain play list is made and the "Chain Play List" screen is dismissed.
The display returns to the "Select Menu" screen, where the current option of the "Chain
Play" menu item flashes (by default, "Off" flashes) and you can now set the chain play
mode.
For details about how to set the chain play mode, see "Setting the chain play mode" on page
9.
8