LED-10 only:
• Function switches for:
Acknowledge
• Enable/Disable key-switch for function switches.
• DIP switches control local functions such as piezo enable/disable, function
switches and key-switch enable/disable.
Receive-Transmit/Receive only
not used
LED-10 Series Address
ROM
Membrane Connectors
Membrane switch connectors
Figure 1-1: Component Summary
Signal Silence
Drill
Key-switch Enable/Disable for LED-10 Only
(not used on the LED-10L or LED-10LS2)
Top view
Note: TB1 & TB2 are
located on backside of PCB
The LED-10 Series sounder, if enabled, will be activated
when any new alarm or trouble is received from the
panel. It is silenced by pressing an ACKNOWLEDGE or
SILENCE switch. Piezo must not be disabled without
approval of LAHJ (Local Authority Having Jurisdiction).
Document 50400
Rev B
10/27/97
System Reset
Piezo Enable/Disable
Piezo Sounder
P/N 50400:B
5