Slide-In Labels for the LED-10 Series Annunciators
Slide-in labels for Zones 1-10 are included with the LED-10 Series Annunciators. In
the event that these labels are damaged or lost, remove this page from the manual
and type the appropriate information on the labels shown below. Type on the lines
provided to ensure centering of information in label windows. Carefully cut out the
labels and insert them into the two label slots on the top left side of the annunciator
face plate.
Note: To ensure the best fit, cut directly along the dotted line surrounding
each label.
Label #1
Label #2
Custom User
Custom User
Label #2
Label #1
Custom User
Custom User
Label #2
Label #1
Document 50400
Rev B
10/27/97
P/N 50400:B
23