What To Do If; Trouble Shooting - AEG Lavamat W 1050 Electronic User Information

Operating Instructions

What to do if ...

Trouble Shooting

Try to rectify minor faults on the washing machine with the aid of the
instructions given here. If you call out an engineer to resolve a fault
listed here, or to repair a fault caused by incorrect use or installation, a
charge will be made even if the appliance is under guarantee.
Problem
The washing ma-
chine does not
work.
The door cannot be
closed.
The display flashes
4 times and and an
acoustic signal is
emitted 4 times
The END light
flashes once an
acoustic signal is
emitted once.
28
Possible cause
The mains plug is not inserted. Insert the mains plug.
The house fuse has blown.
The door is not closed prop-
erly.
The START/PAUSE button was
not pressed for long enough.
The child safety feature is en-
gaged.
The door is not closed prop-
erly.
The water tap is closed.
The filter in the socket of the
inlet hose is blocked.
Water tap is blocked with
limescale or is faulty.
Remedy
Replace the fuse.
Close the door.
There should be an audible
click.
Press and hold the START/
PAUSE button until the pro-
gramme starts.
Release child safety feature
(see Section "Child Safety Fea-
ture").
Close the door properly.
Start the programme again.
Open the water tap.
Start the programme again.
Close the water tap.
Disconnect the hose from the
water tap, remove the filter
and clean under running wa-
ter.
Check the water tap and have
it repaired if necessary.