Running A Washing Cycle; Brief Instructions - AEG Lavamat W 1050 Electronic User Information

Operating Instructions

Running a washing cycle

Brief instructions

A washing cycle consists of the following steps:
0 1. Open the door and load the washing.
2. Close the door.
3. Add detergent/conditioner.
4. Set the appropriate washing programme:
– Set the programme and temperature using the programme selector
– Set programme options as required.
5. Change the Spin Speed /select RINSE HOLD as necessary.
6. Start the washing programme by pressing the START/PAUSE button.
After the washing programme has ended:
Important! If the washing cycle has ended with a Rinse Hold, select
DRAIN or SPIN before opening the door.
7. Open the door and remove the washing.
The door can be opened after the DOOR light goes off and the END
light has come on.
8. To switch off the washing machine: turn the programme selector to
OFF.
16
washing cycle