What To Do If; Remedying Faults - AEG OKO-LAVAMAT 88830 User Information

What to do if...

Remedying faults

In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you use the Customer Service for one
of the faults listed here or to remedy an operating error, the Customer
Service technician's visit will not be free of charge, even during the
warranty period.
• If the fault code C1 or C2 is shown in the
Multi-display, you may be able to remedy the
problem yourself (see the faults table below).
After remedying the fault, press the button O/s (START/PAUSE). If
the fault code is shown again, inform Customer Service.
• In the case of all other displayed faults (C and number or letter code),
please inform Customer Service, quoting the fault code.
Problem
The washing machine
does not work.
The door cannot be
closed.
Water is not running.
(1
Fault code
Possible Cause
The mains plug is not
plugged in.
The fuse of the building's
wiring is not in order.
The filling door is not cor-
rectly closed.
Button O/s (START/PAUSE)
not pressed for long enough.
The child safety feature is set
Water valve closed.
Filter in screw connection of
the intake hose blocked.
appears.
Water tap is blocked with
limescale or is faulty.
Operating Instructions
Remedy
Plug in the mains plug.
Replace the fuse.
Close the filling door; The
lock must engage audibly.
Press the button O/s
(START/PAUSE) until the pro-
gram begins.
Cancel the child safety fea-
ture (see Section "Child
Safety Feature").
Open the water valve.
Close the water valve. Un-
screw the hose from the tap,
remove the sieve and clean
under running water
Check water tap and have it
repaired if necessary.
33