Alpine CVA-1004 Owner's Manual page 45

Indication for XM Radio Mode
ANTENNA
• The XM antenna is not connected to the XM radio
module.
- Check whether the XM antenna cable is attached
securely to the XM radio module.
UPDATING
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
NO SIGNAL (Monitor)
NO SIGNL (Sub-display)
• XM signal is too weak at the current location.
- Wait until the car reaches a location with a stronger
signal.
LOADING
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
OFF AIR
• The channel currently selected has stopped
broadcasting.
- Select another channel.
– – – – – – – – – – (Monitor)
– – – – (Sub-display)
• The user has selected a Channel Number that does not
exist or is not subscribed to.
- The unit will revert back to the previously selected
channel.
• There is no artist name, song/program title, or Auxiliary
Data Field associated with the channel at that time.
- No action needed.
CAP NVM
CAP IO
(Displayed in place of Channel Name when the power is turned on.)
• The unit is out of order.
- Consult your ALPINE dealer.
Information
Indication for CD Changer
HI-TEMP
(Monitor)
HI TEMP
(Sub-display)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
ERROR - 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
ERROR - 02
• A disc is left inside the CD changer.
- Press the EJECT button to activate the eject function.
When the CD changer finishes the eject function,
insert an empty CD magazine into the CD changer to
receive the disc left inside the CD changer.
NO MAGAZINE
(Monitor)
NO MAGZN
(Sub-display)
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
• No indicated disc.
- Choose another disc.
Indication for Monitor
HI-TEMP
(Monitor)
HI TEMP
(Sub-display)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
43
-EN