What To Do If; Remedying Small Faults Yourself - AEG LAVAMAT 74810 User Information

Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the
folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small faults yourself

If during use of the appliance one of the following error codes is shown
in the multi-display:
– E10 (Problems with the water inflow),
– E20 (Problems with the water outflow),
– E40 (door open),
please consult the following table.
After the error has been remedied, press the START/PAUSE button.
In the event of other errors (E and a number or letter): Switch the ap-
pliance off and then on again. Set the programme again. Press the
START/PAUSE button.
If the error appears again, please contact your local Service Force Cen-
tre, stating the error code.
Problem
Washing machine is not
working.
The door cannot be
closed.
When a button is
pressed, Err appears in
the multi-display.
E40 appears.
The END indicator
flashes 4x, and an
acoustic signal sounds
4x.
Possible cause
Mains plug not plugged in
or fuse not working.
Loading door not closed
properly.
The START/PAUSE button
has not been pressed for
long enough.
The child safety device has
been activated.
The selected function
cannot be combined with
the programme set.
The door is not closed
properly.
Remedy
Connect the plug to a mains
socket. Check fuse.
Close loading door - there
should be an audible click.
Press the START/PAUSE for a
longer period of time.
Deactivate the child safety
device.
Select another function.
Close the door properly.
Restart the programme.
19