Citizen BD2-2880 Command Reference Manual page 35

GS / m
[Function] Printing the Download, Bit Image
<1D>H<2F>H<m>
[Code]
[Range] {0 =< m =< 03} Data is described in Hex code.
Prints download bit image in a mode specified by m.
[Outline]
• Modes can be selected by m are shown below.
m
0
1
2
3
• When data exist inside the print buffer, this command is ignored.
[Caution]
• When a download bit image has not been defined, this command is ignored.
• A portion of a download bit image exceeding one line length is not printed.
• A download character and a download bit image cannot be defined simultaneously.
•
If a download bit image data is defined while it is being printed with this command,
printing operation may become unstable (fluctuating print pitch).
• The initial value is not specified.
[Default]
GS *
[See Also]
[Sample Program]
See Sample Program and Print Results for GS * on Page 52.
Mode Name
Normal mode
Double wide mode
Double high mode
Double wide/double high mode
[Print Results]
Dot Density in
Vertical Direction
203 DPI
203 DPI
101 DPI
101 DPI
33
BD2-3880/3890 Command Reference
Dot Density in
Horizontal Direction
203 DPI
101 DPI
203 DPI
101 DPI